LEDs blink in a sequence with Arduino [Knight Rider]

LEDs blink in a sequence with Arduino [Knight Rider]

We all remember TV-series from the 80's Knight Rider. So  there was a car with LED flash. This time I used Arduino UNO board to program LED display, here I used 10 LED bulbs. There are many way to program micro chip in Arduino.

Knight Rider 1

void setup() {

  

     pinMode(2,OUTPUT);

       pinMode(3,OUTPUT);

         pinMode(4,OUTPUT);

           pinMode(5,OUTPUT);

             pinMode(6,OUTPUT);

               pinMode(7,OUTPUT);

                pinMode(8,OUTPUT);

                 pinMode(9,OUTPUT);

                  pinMode(10,OUTPUT);

                   pinMode(11,OUTPUT);

}

void loop() {

  // put your main code here, to run repeatedly:

    for(int i=1;i<12;i=i+1)

 {

  digitalWrite(i,HIGH);

  digitalWrite(i+1,HIGH);

  digitalWrite(i+2,HIGH);

  

  delay(100);

  digitalWrite(i,LOW);

  digitalWrite(i+1,LOW);

  digitalWrite(i+2,LOW);

  

 }

for(int i =12 ;i>=1;i--)

 {

  digitalWrite(i,HIGH);

   digitalWrite(i-1,HIGH);

    digitalWrite(i-2,HIGH);

  delay(100);

  digitalWrite(i,LOW);

   digitalWrite(i-1,LOW);

     digitalWrite(i-2,LOW);

  

 }

}

Knight Rider 2

int pinArray[] = {2, 3, 4, 5, 6, 7,8,9,10,11};

int delayTime = 100;

void setup() {

  // put your setup code here, to run once:

for (int i=0;i<11;i++) {

    pinMode(pinArray[i], OUTPUT);

  }

}

void loop() {

  for (int i=2;i<11;i++) {

   digitalWrite(pinArray[i], HIGH);   

   digitalWrite(pinArray[i+1], HIGH);

   digitalWrite(pinArray[i+2], HIGH);

     delay(delayTime);

    digitalWrite(pinArray[i], LOW);   

   digitalWrite(pinArray[i+1], LOW);

   digitalWrite(pinArray[i+2], LOW);

  }

  for (int i=11;i>=2;i--) { 

  digitalWrite(pinArray[i],HIGH);

  digitalWrite(pinArray[i-1],HIGH);

  digitalWrite(pinArray[i-2],HIGH);

    delay(delayTime);

  digitalWrite(pinArray[i],LOW);

  digitalWrite(pinArray[i-1],LOW);

  digitalWrite(pinArray[i-2],LOW);

  }

}